| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix kasan splat when generating ipv4 pmtu error
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would
cause kernel panic because cmd->device may be freed after returning from
scsi_dispatch_cmd().
This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi_si: fix a memleak in try_smi_init()
Kmemleak reported the following leak info in try_smi_init():
unreferenced object 0xffff00018ecf9400 (size 1024):
comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
backtrace:
[<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
[<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
[<000000006460d325>] 0xffff800081b10148
[<0000000039206ea5>] do_one_initcall+0x64/0x2a4
[<00000000601399ce>] do_init_module+0x50/0x300
[<000000003c12ba3c>] load_module+0x7a8/0x9e0
[<00000000c246fffe>] __se_sys_init_module+0x104/0x180
[<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
[<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
[<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
[<000000005a05337f>] el0_svc+0x24/0x3c
[<000000005eb248d6>] el0_sync_handler+0x160/0x164
[<0000000030a59039>] el0_sync+0x160/0x180
The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix use-after-free in free_netdev
We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.
Reproducer:
[root@host ~]# cat repro.sh
#!/bin/bash
pf_dbsf="0000:41:00.0"
vf0_dbsf="0000:41:02.0"
g_pids=()
function do_set_numvf()
{
echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
}
function do_set_channel()
{
local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
[ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
ifconfig $nic 192.168.18.5 netmask 255.255.255.0
ifconfig $nic up
ethtool -L $nic combined 1
ethtool -L $nic combined 4
sleep $((RANDOM%3))
}
function on_exit()
{
local pid
for pid in "${g_pids[@]}"; do
kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
done
g_pids=()
}
trap "on_exit; exit" EXIT
while :; do do_set_numvf ; done &
g_pids+=($!)
while :; do do_set_channel ; done &
g_pids+=($!)
wait
Result:
[ 4093.900222] ==================================================================
[ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390
[ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699
[ 4093.900233]
[ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 4093.900239] Call Trace:
[ 4093.900244] dump_stack+0x71/0xab
[ 4093.900249] print_address_description+0x6b/0x290
[ 4093.900251] ? free_netdev+0x308/0x390
[ 4093.900252] kasan_report+0x14a/0x2b0
[ 4093.900254] free_netdev+0x308/0x390
[ 4093.900261] iavf_remove+0x825/0xd20 [iavf]
[ 4093.900265] pci_device_remove+0xa8/0x1f0
[ 4093.900268] device_release_driver_internal+0x1c6/0x460
[ 4093.900271] pci_stop_bus_device+0x101/0x150
[ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20
[ 4093.900275] pci_iov_remove_virtfn+0x187/0x420
[ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10
[ 4093.900278] ? pci_get_subsys+0x90/0x90
[ 4093.900280] sriov_disable+0xed/0x3e0
[ 4093.900282] ? bus_find_device+0x12d/0x1a0
[ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e]
[ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 4093.900299] ? pci_get_device+0x7c/0x90
[ 4093.900300] ? pci_get_subsys+0x90/0x90
[ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210
[ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 4093.900318] sriov_numvfs_store+0x214/0x290
[ 4093.900320] ? sriov_totalvfs_show+0x30/0x30
[ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900323] ? __check_object_size+0x15a/0x350
[ 4093.900326] kernfs_fop_write+0x280/0x3f0
[ 4093.900329] vfs_write+0x145/0x440
[ 4093.900330] ksys_write+0xab/0x160
[ 4093.900332] ? __ia32_sys_read+0xb0/0xb0
[ 4093.900334] ? fput_many+0x1a/0x120
[ 4093.900335] ? filp_close+0xf0/0x130
[ 4093.900338] do_syscall_64+0xa0/0x370
[ 4093.900339] ? page_fault+0x8/0x30
[ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 4093.900357] RIP: 0033:0x7f16ad4d22c0
[ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0
[ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001
[ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700
[ 4093.9003
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: coda: Add check for dcoda_iram_alloc
As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: don't leak memory if dev_set_name() fails
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Range check CHDBOFF and ERDBOFF
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power
After 'commit ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct
mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for
vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}.
Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: lpddr2_nvm: Fix possible null-ptr-deref
It will cause null-ptr-deref when resource_size(add_range) invoked,
if platform_get_resource() returns NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: qup: Don't skip cleanup in remove's error path
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Rework long task execution when adding/deleting entries
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
The "exc->key_len" is a u16 that comes from the user. If it's over
IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix multiple LUN_RESET handling
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up
running commands when it hasn't. The bug was added in commit 51ec502a3266
("target: Delete tmr from list before processing").
The problem occurs when:
1. We have N I/O cmds running in the target layer spread over 2 sessions.
2. The initiator sends a LUN_RESET for each session.
3. session1's LUN_RESET loops over all the running commands from both
sessions and moves them to its local drain_task_list.
4. session2's LUN_RESET does not see the LUN_RESET from session1 because
the commit above has it remove itself. session2 also does not see any
commands since the other reset moved them off the state lists.
5. sessions2's LUN_RESET will then complete with a successful response.
6. sessions2's inititor believes the running commands on its session are
now cleaned up due to the successful response and cleans up the running
commands from its side. It then restarts them.
7. The commands do eventually complete on the backend and the target
starts to return aborted task statuses for them. The initiator will
either throw a invalid ITT error or might accidentally lookup a new
task if the ITT has been reallocated already.
Fix the bug by reverting the patch, and serialize the execution of
LUN_RESETs and Preempt and Aborts.
Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list,
because it turns out the original patch fixed a bug that was not
mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second
LUN_RESET and wait on it. Then the second reset will run
core_tmr_drain_tmr_list and see the first reset and wait on it resulting in
a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Release rethook after the ftrace_ops is unregistered
While running bpf selftests it's possible to get following fault:
general protection fault, probably for non-canonical address \
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
Call Trace:
<TASK>
fprobe_handler+0xc1/0x270
? __pfx_bpf_testmod_init+0x10/0x10
? __pfx_bpf_testmod_init+0x10/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_testmod_init+0x22/0x80
? do_one_initcall+0x63/0x2e0
? rcu_is_watching+0xd/0x40
? kmalloc_trace+0xaf/0xc0
? do_init_module+0x60/0x250
? __do_sys_finit_module+0xac/0x120
? do_syscall_64+0x37/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
</TASK>
In unregister_fprobe function we can't release fp->rethook while it's
possible there are some of its users still running on another cpu.
Moving rethook_free call after fp->ops is unregistered with
unregister_ftrace_function call. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: fix NULL pointer dereference when removing device
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication. |
| In the Linux kernel, the following vulnerability has been resolved:
dax: Fix dax_mapping_release() use after free
A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region
provider (like modprobe -r dax_hmem) yields:
kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000)
[..]
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260
[..]
RIP: 0010:__lock_acquire+0x9fc/0x2260
[..]
Call Trace:
<TASK>
[..]
lock_acquire+0xd4/0x2c0
? ida_free+0x62/0x130
_raw_spin_lock_irqsave+0x47/0x70
? ida_free+0x62/0x130
ida_free+0x62/0x130
dax_mapping_release+0x1f/0x30
device_release+0x36/0x90
kobject_delayed_cleanup+0x46/0x150
Due to attempting ida_free() on an ida object that has already been
freed. Devices typically only hold a reference on their parent while
registered. If a child needs a parent object to complete its release it
needs to hold a reference that it drops from its release callback.
Arrange for a dax_mapping to pin its parent dev_dax instance until
dax_mapping_release(). |
